The a result of water on the facades manifested mainly through stains and run-off, but the degradation in the real estate interior will be the significant consequence.
Beyond the healthy wear from the materials, the anomalies that will arise for the wall surfaces should be generally the following factors:
? Actions of the framework;
? Not enough maintenance;
? Insufficiencies of construction;
? Features from the existing layer;
Painting facades
Typically the facade of a house should be inside good condition therefore that it can protect the home effectively.
A ruined coating fails in order to perform the barrier function to ecological agents, can endanger the quality regarding the inside of the housing.
Thoughts
? It is very important that the facades of a house stay in good problem.
? Helpful hints will be to be rehabilitated when they begin to be able to present some form of wreckage.
? A faster or even slower degradation depends on various aspects such as typically the area the location where the home and materials of which were used.
? Very rough zone causes a much more rapid deterioration of typically the materials. It is significant that will the materials will be of high good quality.
? The quality regarding the applied fresh paint includes a direct regards to enough time it takes surfaces to achieve the state of degradation.
? Painting regarding a facade should be performed in very good weather, if now there is rain qualified prospects not initiate the particular work. We advise so that this particular work is only carried out, according to some of the country's area (south / north), in general between the months of May well and September.
? It is not recommended to apply the paint on very hot supports with regard to sun exposure, since due to the paint to dry out too quickly goes the risk involving forming cracks.
? Likewise not recommended to apply the paint once the ambient temperature will be below 5 � C, and when the relative humidness exceeds 80%.
? Always use high-quality paint, especially outdoors. This is a gold rule.
? Cheap color, subjected to outdoor problems, sun, rain, and many others., will spoil really quickly make typically the walls of unguaranteed housing.
Before building a paint work, should carry out and about an assessment (more) the most correct possible problems that may exist about the walls involving the room. Simply in possession of a well carried out diagnosis it is usually you can decide the best paint structure using.
Once the problem is cracking, which often manifest themselves in the coating but typically appear from the plaster based on the need to be able to remove the existing coating must always be evaluated, treating typically the problem with the beginning and coated again.
Whatever the scenario it is a good idea always an important process, evaluating the facade as a whole.
HOW TO RECOVER A FACADE
1. Remove all the troublesome things that may exist upon the walls, such as posters, fingernails or toenails, screws, etc;
2 . Wash the whole surface with higher pressure machine (40 bars), and enable this dry;
3. Bring out all necessary repairs, replace the particular deteriorated concrete, seal the cracks and even cover the openings;
4. Apply a good anti-fungal solution, when necessary;
5. Apply a primer cover, fixer, sealant or even other according to the scenario, suitable for outdoor walls;
6. Lastly proceed to color using the paint like the most ideal state of typically the wall. This ink should be of good quality, and should follow the instructions provided by the manufacturer, this sort of as; dilution, drying out time, and so forth
RESTORE FACADE COATED SUBSTANCE CERAMIC
Facades coated with ceramic stuff with cracks in addition to damaged joints start water leaks plus moisture, therefore it is necessary to deal along with this matter as swiftly as possible. A few see how to carry out;
1. Remove all awkward adhesions of which may exist around the walls, such since posters, nails, anchoring screws, etc;
2. Rinse the complete surface together with a pressure machine (water jet) together with dilute hydrochloric chemical p in water;
a few. Carry out all repairs of splits and joints having a mass of repairs to exterior mixed with 10% cement;
some. Sand all regions repaired to regularize the top;
5. Use a coat associated with aqueous primer, insulation from various spots and outdoor for adhesion promoter (type Stop stains);
six. Finally proceed to be able to painting, using an adaptable membrane acrylic photo-cross linking for fa�ade protection. This tattoo should be of great quality and usually the actual instructions provided by the maker.